RØDE’s AI-1 Audio Interface is packed with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go. Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.
AI-1 Audio Interface Specifications
| Computer Connectivity | USB
|
| Form Factor | Desktop
|
| Simultaneous I/O | 1 x 2
|
| Number of Preamps | 1
|
| Phantom Power | Yes
|
| Bit Depth | 24-bit
|
| Sample Rates | 44.1 kHz
48 kHz
88.2 kHz
96 kHz
|
| Analog Inputs | 1 x Neutrik XLR-1/4” combo
|
| Analog Outputs | 2 x 1/4” (impedance balanced)
1 x 1/4” (headphones)
|
| Direct Monitor | Yes
|
| USB | 1 x USB Type C
|
| Bus Powered | Yes
|
| OS Requirements | Mac OS 10.10 or later
Windows 7 or later
|
| Power | USB bus-powered
|
| Depth | 100mm total (with knobs)
chassis: 88mm
|
| Width | 124mm
|
| Height | 38mm
|
| Weight | 1lb 3.7oz
560g
|
XLR/MIC INPUT
| Dynamic Range | 104dBA
|
| Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted) | –128dBA
|
| Frequency Response (Measured after ADC) | 20Hz – 20kHz better than ±1dB
|
| Gain Range | 0dB – >45dB
|
| Gain Range | 1.3k Ohms
|
INSTRUMENT INPUT
| Dynamic Range | 99dBA
|
| Frequency Response (Measured after ADC) | 20Hz – 20kHz better than ±1dB
|
| Gain Range | 0dB – >45dB
|
| Input Impedance | 900k Ohms
|
MONITOR OUTPUTS
| Maximum Output Level | -6dBu
|
| Frequency Response | 20Hz – 20kHz better than ±1dB
|
HEADPHONE
| Max output power at 1% THD | 32Ohms – >210mW
300Ohms – >390mW
|
